TRAMPOLINE

JOC-96

Trampoline with metal structure of hot-dip galvanised steel and jumping surface formed by a grid built of moveable slats. The jumping surface is connected to the metal frame via springs. The frame is covered above by a border of impact protection slabs of caoutchouc. The trampoline is pre-mounted ready for installation.

To enable the periodic cleanup inside the trampoline below the jumping surface, it is possible with a special tool to uncouple easily the springs from the frame in order to get inside. Furthermore, the frame disposes of lateral hinges which allow to open it up (possible when installed in unbound surface; not possible in bound surface).

USAGE by WHEELCHAIR USERS:

The wheelchair user has to be accompanied by another person. Fasten the wheelchairs seat belt to safeguard the wheelchair user. The accompanying person stays with his feet at the firm frame of the trampoline. The wheelchair enters on the jumping surface of the trampoline in a slightly leant backwards position like crossing a kerbstone. Set the brakes to lock the wheels. The accompanying person moves the wheelchair on the handles up and down to provoke little jumping movements.

SAFETY ADVICES:
The surface of the safety area has to comply with the requirements as for a free fall height (H.I.C. value) ≥1000mm. Furthermore, the safety zone above the trampoline is 3500mm, being free from obstacles like trees, lamp poles or other devices.

USAGE INSTRUCTIONS:
Avoid doing somersaults and jumps with landing on the stomach or back.
Respect the number of users.
Do not eat or drink during the activity.
Do not wear jewellery or other things which could entangle in the trampoline.
Wear shoes without heels. Do not jump barefooted.

Request a quote

Category Normativa EN-1176

HIC (cm)
100
Dimensions
150x150cm
Inclusive
Inclusive
Material
Steel

* Structure: Hot-dip galvanized steel   

* Safety border: Impact protection slab of caoutchouc

* Juming surface: Synthetic moveable slats

Plano
ficha_tecnica