Set consisting of four towers with non-slip phenolic plywood platform, equipped with a moisture protection film, measuring 100×100 cm and located at a height of 90 cm, 1.30 m and 1.50 m.
Structural posts in EN-AW6063 aluminium with anodised finish and stainless steel guard rails. The platform structures are made of 40x30x1.5 mm rectangular tubing in zinc-plated steel and powder-coated with polyester.
Access:
– 90 cm tower made of perforated HDPE panels with nylon handles to facilitate and ensure grip, and also via a small climbing net.
– 1.30 m tower with a spiral ladder bar.
– 1.50 m tower with a climbing ramp with slats and a rope and vertical rope ladders.
– Second 1.50 m tower made of perforated HDPE panels with nylon handles to facilitate and ensure grip.
The towers can be descended using the same access route, via a 90 cm open polyethylene slide, a 1.30 m open polyethylene slide, a 1.50 m open polyethylene slide, a 1.50 m fireman’s pole or 1.50 m double sliding bars, both made of stainless steel.
The 90 cm and 1.30 m towers are connected by a flexible bridge and ropes for support. The 1.50 m tower is connected to the 90 cm tower by bars with rings.
The two 1.50 m towers are connected by a rope bridge and polyethylene panels that also allow children to play underneath and hang from the rings.
Accessibility has been taken into account at the bottom of the towers, with a width of more than 80 cm allowing a wheelchair to pass through. A play panel with activities has been integrated on both sides, designed so that several children can play simultaneously. This panel includes a peephole and a mirror that stimulates the development of self-awareness, as well as a maze game that allows a piece to be moved along a rail to develop hand-eye coordination. At the bottom of one of the towers there is also a bench to rest on and a hammock seat.
Manufactured with high-quality, highly resistant materials, ensuring long durability and low maintenance. Galvanised/stainless steel screws concealed with nylon caps. Installation using hot-dip galvanised steel anchor bushings.
